One-app control
Pumps, heat, lights, spa, and features controlled from your phone, anywhere.
Smart automation puts the pool, spa, lights, heat, and features at your fingertips. WETYR Pools installs and upgrades control systems that make a pool effortless.
Modern pool automation links pumps, heaters, lighting, water features, fire features, and chemistry into one system you control from a phone or wall panel. Set schedules, trigger scenes, and monitor everything remotely. Automation also saves energy by running variable-speed equipment only when needed.
WETYR Pools handles automation as a craftsman-led, design-build team. The people who plan your project are the people who build it and stand behind it, with no quality lost in the handoffs between separate companies. One team, one standard, and one point of accountability from the first conversation through long-term care.
An older pool quietly demands a surprising amount of attention. Someone has to remember to run the pump and for how long. Someone walks out to the equipment pad to turn valves for the spa, flips breakers for the lights, and lights the heater an hour before anyone wants to get in. None of these tasks is hard, but together they add friction, and friction is what stands between owning a pool and actually using it.
Smart automation removes that friction entirely. It links the pumps, the heater, the lighting, the spa, and the water and fire features into one coordinated system, and it hands you the controls, on a wall panel and, more usefully, on your phone. The pool stops being a set of machines you operate and becomes a single thing you simply tell what to do.
WETYR Pools installs automation on new builds and retrofits it onto existing pools. The goal is the same in both cases: a pool that responds instantly to what you want, runs itself efficiently when you are not thinking about it, and never makes you walk to the equipment pad in the dark again.
Pumps, heat, lights, spa, and features controlled from your phone, anywhere.
Save evening, party, and energy-saver scenes, and automate daily run times.
Variable-speed pumps and smart scheduling cut electricity use.
We retrofit automation onto existing pools with older equipment.
The power of automation is that it brings every separate part of the pool under one coordinated control. These are the systems it ties together.
Automation runs the circulation on smart schedules and, with a variable-speed pump, at the right speed for each task. This is where much of the energy saving comes from: the pump runs as much as the water needs and no more.
Set the pool or spa temperature from your phone on the drive home, so the water is ready when you arrive. Spa modes, valve actuation, and heating are handled by the system instead of a trip to the equipment pad.
Pool and landscape lighting, color-changing LEDs, waterfalls, scuppers, deck jets, bubblers, and fire features all come under one controller, ready to be triggered individually or as part of a scene.
Automation can integrate salt systems and chemistry monitoring, and it lets you check status and adjust settings remotely, so you always know the state of the pool even when you are not home.
The feature owners end up loving most is scenes. A scene is a saved combination of settings that the whole pool snaps to with one tap. Instead of adjusting a pump, a heater, three lighting circuits, and two water features one at a time, you tap once and the pool arranges itself.
A few scenes cover almost everything. An evening scene might warm the spa, set the pool lights to a soft tone, and start a waterfall. A party scene might run the deck jets, cycle the LED colors, and bring up the fire features. An energy-saver scene quiets everything to its most efficient state. A morning scene might run a stronger circulation cycle and hold the lights off. You define the scenes around how your family actually lives, and after that the pool simply has modes.
Schedules handle the rest without any input at all. Filtration runs on the cycle the pool needs, lighting follows sunset, heating anticipates the times you usually swim. Between scenes you trigger by hand and schedules that run on their own, the day-to-day operation of the pool effectively disappears, which is exactly what good automation should do.
Automation is a convenience upgrade, but it is also an efficiency upgrade, and the two reinforce each other. The pump is typically the largest electricity user connected to a pool, and an older single-speed pump runs flat out whenever it runs at all. Pairing automation with a variable-speed pump changes that completely: the system runs the pump at a low, quiet, efficient speed for everyday circulation and only steps it up when a task genuinely needs the flow. Over a year, that disciplined operation meaningfully reduces the pool's electricity use.
Smart scheduling adds to the saving by making sure nothing runs longer than it needs to and that energy-hungry tasks happen at sensible times. The result is a pool that costs less to run while also being far easier to live with, so part of the upgrade pays for itself in the energy it stops wasting.
Retrofitting automation onto an older pool is one of the highest-value improvements an owner can make, and it is often done alongside a variable-speed pump and LED lighting for the full benefit. WETYR Pools assesses your existing equipment, recommends what is worth keeping and what is worth upgrading, and presents it all in a clear, fixed, itemized proposal. The same one team that knows your whole pool installs it and stands behind it.
Clear answers to the questions homeowners ask most.
Yes. Retrofitting modern automation onto an existing pool is one of the highest-value upgrades an owner can make. It is often done alongside a variable-speed pump and LED lighting, and the efficiency gains help offset the cost.
It brings the whole pool under one system: pumps and filtration, heating, the spa, pool and landscape lighting, waterfalls and other water features, fire features, and salt or chemistry systems, all from one app or wall panel.
It can, meaningfully. Paired with a variable-speed pump, automation runs circulation at an efficient speed and only steps it up when needed, and smart scheduling stops anything running longer than necessary. Over a year that reduces electricity use.
A scene is a saved combination of settings the whole pool snaps to with one tap, an evening scene, a party scene, an energy-saver scene. Instead of adjusting pumps, heat, lights, and features one at a time, you tap once and the pool arranges itself.
Yes. Automation is controlled from your phone, so you can warm the spa on the drive home, check the pool's status, adjust settings, or turn features on and off from anywhere.
No. The day-to-day experience is simple: tap a scene, or let schedules run on their own. We set the system up around how your family uses the pool, so the technical part is handled before you ever touch it.
WETYR Pools provides automation to homeowners nationwide, including these communities.
Fire and water together create drama no other feature can match. WETYR Pools designs fire bowls, sheer descents, scuppers, and deck jets that make a pool the center of every evening.
Explore fire & water featuresSunshine is free energy. WETYR Pools designs and installs solar pool heating that warms the water and lengthens your swim season with almost no running cost.
Explore solar heatingWhen pool equipment fails, WETYR Pools diagnoses and fixes it fast, and upgrades aging gear to efficient modern equipment.
Explore equipment repairTell us about your property and your goals. We will explain your options in plain language and prepare a free, no-obligation quote. No pressure, ever.
Automation, designed and built by WETYR Pools.
Tell us about your property and your vision. We will prepare a free, no-obligation quote.